RCI 100.130T
Mobile Crushing Plant with Impact Crusher RCI 100.130 T| Application Data | |
| Feed material: |
natural stone, building debris, asphalt, gravel |
| Throughput capacity: | up to 250 t/h (depending on feed material and gap width) |
| Feed material size: | max. 450 mm edge length building debris max. 600x600x200 mm |
| Final grain size: | 0/30 mm - 0/50 mm |
| Drive: | Diesel genset, power 225 kVA |
| General technical Data | ||
| working condition | transport condition | |
| Length: | approx. 14.20 m | approx. 14.10 m |
| Width: | approx. 3.70 m | approx. 2.55 m |
| Height: |
approx. 3.85 m | approx. 3.70 m |
| Total weight: | approx. 39,000 kg without option |
|
| Ground prssure of tracks: |
approx. 15.0 N/cm² without options |
Description:
Impact Crusher RCI 100.130 (rotor with 4 impact bars)
- Inlet opening 1.360 x 852 mm
- Rotor diameter 1.000 mm, rotor width 1.300 mm
Feeder Bin approx. 6 m³
- Highly wear resistant welded steel construction, bin walls can be folded hydraulically
Vibratory Conveying Trough 1.100 x 3.500 mm
- pre-screening:
- upper deck: 2-stage grid section, each 750 mm long, opening 40 mm
- lower deck: finger screen, 2-stages, free-swinging, opening 25 mm - 2 unbalance motors, electrical 2 x 2.69 kW
Undercarriage
- Bridge construction, welded of steel plates and sectional steel
- Crawler track unit, travel speed 1.6 km/h, admissible gradient approx. 20 %
Drive Unit
- Diesel genset 225 kVA; incl. tank 400 litres; incl. filler pump, enclosed all over
- Diesel engine, type PERKINS 1306 E87-TA; 198 kW
- Three-phase squirrel cage motor, 132 kW, 1.500 rpm, 400 V, 50 Hz
- Driving elements
Hydraulic unit to drive the crawler undercarriage
- Hydraulic unit completely mounted on base frame
- Wireless remote control
Electrical Equipment - SPS control system
- Switch cabinet with operation panel
- Frequency converter
Wireless Remote Control
Belt Conveyors
- Main discharge conveyor belt, 1.000 x 7.700 mm, troughed
- Discharge conveyor belt for pre-screened material available in two versions,
* either 500 x 2.800 mm hydraulically foldable, or
* 500 mm x approx. 6.000 mm, rigid, can be inserted laterally
Discharge Chute, 1.100 x 2.670
- Wearing plates, bolted to the chute body
- 2 unbalance motors, electr. 2 x 2.29 kW
Platforms and Access Ladders
Spraying Device
Options
- Overbelt magnet separator
- Belt scale
- Hydraulic system to lift the front impact element
- Grinding path
- Service crane, mechanical - carrying capacity 500 kg
